Condu Locks

/ Duct Shop Fabrication processes / By /

Dyn-O-Loc

Condu Lock—Duct Reinforcement 

Condu Locks are visible on the cheek of this Radius Elbow. The Conduit is inserted through a hole in the duct wall and secured with a Condu Lock

 Tie Rods can be used to support duct sizes over 48” or smaller duct in high pressure applications. Dyn-O-Locs insert into the ends of the hollow tie rods to provide a means of attaching the conduit to the duct.

• Available for use with 1/2” or 3/4’’ Conduit.
• Properly installed Dyn-O-Loc is pull tested to withstand
over 1900 lbs.
• Large self-sealing washer preinstalled on the Bolt.
• Long bolt for easier installation.
• Bolt length: 1-1/2″ total or 1-3/8″ under the head