Plasma Table labels are always advertised as “removable” but, once applied they are near impossible to remove easily. In instances where an architect or engineer require them removed (sometimes on exposed ductwork), there’s a lot of effort required to scrape these stickers off the duct. 

 

 

We sell a product that comes in a Spray Can and is specifically for removing labels off duct without discoloring the Galvanized. It’s called a Degreaser but it’s simply a label remover. Spray on the label and watch it dissolve…….without discoloring or affecting the Galvanized itself.

 

 In most cases, the stickers are left on by the shops I deal with.  If the duct is going to be exposed, the shops will often use blue painter’s tape to apply the sticker without peeling off the backing.  Even though the stickers are advertised as “removable”, once applied, they’re almost impossible to completely remove without a product like Duro Dyne’s Solvent Based Degreaser.