Duro Dyne TSP-1 Spotwelder (110 V)
- Duro Dyne TSP-1 Spotwelder 110 Volt, requires 25 amp fuse. Capacity of this Spotwelder is 2 Pieces of 20 ga Galvanized
Duro Dyne TSP-1/TSP-2/TBW Owner’s Manual
Duro Dyne’s TSP-1 Spotwelder is air cooled on a stand with 18” tongs and tips. These portable Spotwelders are ideal for shops that need a spotwelder but not on a high production level. Duro Dyne discontinued making them a few years ago after some 75 years. We bought the remaining 8 and have them available…but just these remaining machines.
February 2020 UPDATE: We have sold all remaining inventory of our TSP-1 Spotwelders. We suggest the Duro Dyne BAW2 Water Cool Spotwelder as an alternative.
- There are two ways of engaging the weld: by the lever handle or the foot pedal actuator. In each the welding tips close against the material to be welded and 2 pcs of metal fuse together
- The stand has the foot pedal actuator that is a handy option to the level handle depression, because it allows operator to have both hands free for holding the metal
Parts List:
#9210 TSP/TBW Front Body
#9211 TSP Rear Body
#9212 TBW Rear Body
#9213 TSP/TBW Rear Body Cover
#9214 TSP Carriage
#9215 TBW Carriage
#9216 TSP/TBW Nose Piece
#9217 TSP/TBW Lower Arm Mounting
#9218 TSP Handle
#9219 TBW Handle
#9220 TSP/TBW Switch Mounting Bracket
#9221 TSP/TBW Handle Spring
#9222 TSP/TBW Actuator Spring
#9223 TSP Nylon Actuator
#9224 TSP/TBW Micro Switch
#9225 TSP/TBW Switch Control Screw
#9226 TSP Timer 110 Volt
#9227 TSP/TBW Potentiometer
#9228 TSP-1 Weld Transformer
#9229 TBW Weld Transformer
#9230 TSP Line Cord 110 Volt
#9231 TSP2/TBW Line Cord 220 Volt
#9232 TBW Hi/Lo Switch
#9233 TSP/TBW Filter Screen
#9234 TSP-1 Primary
#9235 TBW Primary
#9236 TSP Secondary
#9237 TBW Secondary
#9238 TSP/TBW Pivot Bolt
#9239 TSP2/TBW Timer 220 Volt
#9240 Line Cord Retainer
#9241 TBW Nylon Activator
#9242 TSP-2 Weld Transformer
#9243 TSP-2 Primary