Vicon 520-DL Dual Plasma and Liner Cutting System:
Taking automation of the Fittings to another level…
One of the most manual tasks in Duct Shops is the process of laying out, measuring and manually cutting liner fittings to their corresponding metal fitting. Liner Drop accumulates daily in each shop due to measuring mistakes and poor cut optimization, the result of which is that duct shops buy significantly more liner than necessary each year. Shops that struggle with this are the same ones who understand how much labor and scrap savings the Plasma Table has meant for the metal.
The news that there’s a machine available that does for liner what the plasma does for metal will be welcomed by shops looking for improved efficiency and less waste on duct liner.
Synchronized on the same cutting software and Paired together on an Aluminum Gantry that Moves fast along the 5 x 20 workspace, one raises out of the way while the other is processing and vice versa. To watch this machine in operation is to wonder why a shop doing a lot of Lined Duct would NOT buy them together . The Liner Cutting system is the natural compliment to any Plasma Table because it works WITH it, interfacing to automatically downsize and cut to the corresponding sheet Metal burned out on the Plasma Table
Router bit for cutting Liner and Plasma Torch for cutting Metal travel on same gantry; one pulls up and out of the way when the other is cutting
- Dual Rack and Pinion Drive on X-Axis
- Precision Vee Guides on Y-Axis
- Dell PC CNC Control Automatic Liner Downsizing
- Duct Liner Router Cutting Head, Patented Router Cutting Technology
Included: Hypertherm Powermax 45
PRICING
HVAC 520 DL
$63,400.00 USD
(Effective April 2019)Office Programming System (includes PC and Software)
$3,600.00 USD
(Effective April 2019)Dell PC loaded with Vicon ViSoft Cutting Software to be used for office programming. The office computer and machine controller communicate via a Microsoft LAN network. Includes Ethernet card, hub, and 100’ LAN Cable.Office Programming Software (software only, per seat)
$2,800.00 USD(For use on existing office computer running Windows®7 or 10)Download/Interface from Software other than Vicon
$4,500.00 USDPrice of machine includes On Site Start-Up and Training for a Total of 3 DaysAll Prices are F.O.B. – Meadville, PA