Vicon TDX II 12 Station Rollformer
12 station machine rolls a TDC profile flange to the end of the duct joint from the same gauge as the duct meeting SMACNA classification for T25 rolled on transverse connector. There are two profiles of this rolled on flange – the T24a (TDC profile) which has a hem turned outside and the T24b (TDF profile) which has a hem turned inside. the 12 station rollformer forms the TDC profile; the 16 station forms the TDF profile.
The quietest TDC/F Rollformer on the market and the only 12 station Machine of it’s kind made in the USA, Vicon’s TDX-II…
- Vicon TDX II 12 Station Rollformer
- TDC Profile
Vicon TDX-II 12-Station Machine is tooled to produce the T-25a Transverse Duct Connection for 4-bolt connection. It has a forming speed of 50 feet per minute, from 12 stations, and is 18-26 Gauge capacity. 5 HP motor with roller chain and oil bath, for a quiet and smooth operation. This machine runs a TDC profile but uses TDF Corners.
Vicon’s 12 Station TDX Machine makes a TDC profile but uses TDF corners. If requested, Vicon can make the machine to work with TDC corners—Model TDC II-C. For shops that are replacing an existing Lockformer TDC machine, this route is suggested because they are already working with a C corner.
TDX Rolls typically mounted on left outboard, however we stock both left outboard and right outboard and allow contractor to specify left to right or right to left flow. Right outboard would indicate your right hand is feeding the material with your left hand trailing. Left outboard would indicate that your left hand is feeding the material as your right hand is trailing.
