Item Code: BISH6014 14Ga. 60’’ Hydraulic Metal Shear #SH6014
Item Number | SH-6014 |
---|---|
Back Gauge Length | 24″ |
Shear Length | 60″ |
Motor | 3 hp |
Thickness (SS) | 14 ga. (18 ga.) |
Strokes Per Minute | 30 |
Front Gauge Length | 24″ |
Blade Angle | 1° |
Power | 220V / 3-phase |
Shipping Weight | 2150lbs |
Minimum Material Thickness | 24ga |
Shipping Dimensions (Inches) | 85x35x54 |
- Front support arms and table guides keep the material square to the blade.
- 3 modes on the operator console:
- Inch mode: Jog the control and ease the blade down to the material.
- Single mode: Make one cut cycle per foot pedal push.
- Auto mode: Continue cycling as you hold the pedal down.
- Comes standard with high carbon chromium blades.
- Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money.
- Hold-down carriage with 9 fingers clamps the sheet metal firmly against the infeed table, improving blade life.
- Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
Baileigh SKU: 1007176