Spec Sheet
Cutter Attachment Diagram
Warranty
Operator’s Manual
10 station rollformer with Flat S and Drive Cleat rolls built inboard and 2 outboard roll set profile available, pulls approx 16 amps, standard 230 Volt 3 Phase Electrics. Single Phase Electrics available as special order
Runs 100 ft per min
With (10) Forming Stations, the Flagler Quadformer comes standard with “S” and Drive Cleat on the inboard forming positions. Machine has two Outboard Auxiliary Shafts which allow for your choice of Male or Female Button Lock, or Pittsburgh and 3-in-1 Rolls. The optional Quad Cutter attachment allows the shop to use up drop for their S & Drive Cleats while also avoiding having to pre-cut widths of 2.125″ and 3.625″
Item Codes and Factory List Pricing:
FL-QUAD Quadformer “S” and Drive Machine (10 station) Model #23-000 3Ph Factory List Price: $19,100.00 USD
FL-QUAD-1PH FLAGLER Quadformer w/S&D rolls 1Ph Factory List Price: $19,100.00 USD
Slitting Attachment (optional):
FL-Q-CSA = Factory List Price: $4,400.00 USD Quad-Cutter Slitting Attachment #23-200 (Video Demo)
Outboard Rollsets (pick two):
- FL-QUAD-FBL 1/2″ Female Buttonlock Rolls (20-30 gauge) #62-000-F [#30-067] $2,890.00 USD
- FL-QUAD-MBL 1/2″ Male Buttonlock Rolls (20-30 gauge) #62-000-M [#30-077] $2,860.00 USD
- FL-Q-38P 3/8″ Female Pittsburgh Rolls (18-24 gauge) #55-000 $3,300.00 USD
- FL-Q-516P 5/16″ Female Pittsburgh Rolls (20 gauge) #54-000 $3,200.00 USD
- FL-QUAD-RAF 1/4″ Male Pitts/Right Angle Flange Rolls (20-26 gauge) #60-000 $2,400.00 USD
- FL-Q-3N1 Flagler 3in1 (5/8″ Tap) Rolls for Quad (22-28 gauge) #50-000 $3,300.00 USD
- FL-Q-38DSR 3/8″ Double Seam Rolls/Acme Lock (20-26 gauge) #57-000 $2,400.00 USD
- FL-Q-12DSR 1/2″ Double Seam Rolls /Acme Lock for Quad (16-20 gauge) #58-000 $2,400.00 USD
- 1/2″ x 180° Hem Rolls (20‐26 gauge) #64-000 $3,400.00 USD
(Pricing Effective August 2024)
All Quadformers come standard as 3 Phase. For Single Phase add $740.
Note: If ordering for an existing unit to be converted, price is $1,000, then factory will issue credit of $260 upon receipt of original motor and starter return.
Tap in 3-in-1 rollset includes Outside Tap, End Cap profile, ½” Right Angle
4-in-1 entrance guide is upon request, no additional charge
Usually they are set for the ¼” right angle Male Pittsburgh