Spec Sheet
Blog
Video Demo
TDX Layout Form
Item Codes:
VICTDX-16 Vicon 16 Station TDX Rollformer
VICTDX-16-10HP
Vicon TDX 16-Station Machine has two Outboard and one Inboard Rollset options. Comes standard with the T-25b Transverse Duct Flange (F Profile) on one of the two outboard sides. 70 feet per minute forming speed, 26 thru 18 gauge Galvanized capacity. 7.5 HP motor with roller chain and oil bath, for a quiet and smooth operation.
Did You Know: If a shop has a TDX16 with standard electrics of 230 volt 3 phase, and they want to use 460 to run machine, they can purchase part # ESWB9D 460 Starter and Heater plus a few wiring changes and then run the 230 Volt machine on 460 electrics.
Length of 126”, Width of 29”, Height of 41” and Weight of 2,725 lbs
Base Machine with F profile or C profile (70 FPM) : $38,900.00 USD
(specify Right or Left outboard side)
Outboard Rollsets (choice of one):
1-1/8” 18 Gauge 3 in 1 Large Outside Tap, Large Standing Seam And Male Right Angle Flange: $ 6,400.00 USD
1-5/8” 16 Gauge 2 in 1 Large Standing Seam: $ 6,400.00 USD
Large Female Pittsburgh 16 ga thru 24 gauge: $ 4,400.00 USD
2” x 2” x 16 ga Fire Damper/Retaining Angle: $ 6,200.00 USD
TD (F Profile) Cleat Rolls 20-22 gauge twelve stations (does not lance/stitch the metal): $ 6,000.00 USD
Inboard Rollsets (choice of one):
1 1/8” 20 Ga-24 ga Standard Standing “S”Cleat: $14,500.00 USD
1-5/8” 20-22 gauge Standing S (bar slip): $15,650.00 USD
TD Cleat Rolls 20-22 gauge sixteen stations (does not lance/stitch the metal): $ 7,500.00 USD
Options:
Variable Frequency Drive for speed adjustment: $2,450.00 USD
10HP Motor with Heavy Duty Gearbox for 16 gauge capacity on TD profile: $1,900.00 USD
Industrial Chrome Plating for TD (F Profile) roll set: $3,000.00 USD
Modified Frame for Short Throat Fittings (3″): $1,000.00 USD
(Effective May 2021)
